There were 9 defects noted.

Major:
- Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))
- Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
- Nearside Rear Brake disc contaminated oil from rear differential (1.1.14 (b))
- Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
- Exhaust system insecure both rear mounts missing (6.1.2 (a))


Advisory:
- Oil leak, but not excessive (8.4.1 (a) (i))
- Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive subframe mounting (5.3.6 (a) (i))
- Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

There were 5 defects noted.

Advisory:
- NON flexible mascot fitted to bonnet
- Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
- Fluid leak, but not excessive (8.4.1 (a) (i))
- Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
- Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

There were 6 defects noted.

Advisory:
- NON flexible mascot fitted to bonnet
- Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
- Fluid leak, but not excessive (8.4.1 (a) (i))
- Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
- Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))


Pass after Rectification at Station:
- Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

There were 4 defects noted.

Advisory:
- NON flexible mascot fitted to the bonnet
- Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))
- Under-body under-sealed obscuring some components

There were 6 defects noted.

Major:
- Offside Headlamp aim too high (4.1.2 (a))


Advisory:
- NON flexible mascot fitted to the bonnet
- Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Subframe (5.3.6 (a) (i))
- Under-body under-sealed obscuring some components


Pass after Rectification at Station:
- Nearside Headlamp aim too high (4.1.2 (a))

There were 17 defects noted.

Major:
- Hazard warning switch inoperative (4.4.2 (a) (ii))
- Nearside Headlamp aim too low (4.1.2 (a))
- Offside Headlamp aim too high (4.1.2 (a))
- Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
- Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Foot well (7.1.1 (a) (i))
- Nearside Rear Suspension arm pin or bush excessively worn Trailing (5.3.4 (a) (i))
- Offside Rear Suspension arm pin or bush excessively worn Trailing (5.3.4 (a) (i))
- Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
- Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))


Advisory:
- Spare tyre defective
- NON flexible mascot fitted to the bonnet
- Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
- Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Anti roll bar (5.3.6 (a) (i))
- Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
- Rear Gearbox mounting defective
- Oil leak, but not excessive (8.4.1 (a) (i))
- Vehicle undersealed obscuring some body components

There were 2 defects noted.

Advisory:
- Front Registration plate deteriorated but not likely to be misread damaged (0.1 (b))
- front to rear vehicle covered with underseal

There were 36 defects noted.

Fail:
- Windscreen washer provides insufficient washer liquid (8.2.3)
- Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
- Horn sounds harsh or grating (1.6.2e)
- Rear Registration plate lamp not working (1.1.C.1d)
- Rear Registration plate lamp insecure (1.1.C.1c)
- Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
- Exhaust emissions hydrocarbon content excessive (7.3.B.1b)
- Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
- Front registration plate insecure (6.3.1b)
- Front registration plate deteriorated (6.3.1d)
- Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
- Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
- Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
- Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
- Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
- Offside Rear Exhaust mounting missing (7.1.1b)
- Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
- Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
- Parking brake: efficiency below requirements (3.7.B.7)


Advisory:
- Front coil spring corroded (2.4.C.1b)
- Rear coil spring corroded (2.4.C.1b)
- Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Rear Subframe mounting prescribed area is distorted but not considered excessive (2.4.A.3)
- Nearside Front wheel bearing has slight play (2.5.A.3c)
- Offside Front wheel bearing has slight play (2.5.A.3c)
- Front Shock absorber has a slightly worn bush (2.7.4)
- Rear Shock absorber has a slightly worn bush (2.7.4)
- Front Shock absorber has slight corrosion to the casing (2.7.2a)


User Entered:
- Fuel pipe/s corroded
- Oil leak
- brake pipes front and rear

There were 18 defects noted.

Fail:
- Nearside rear parking brake recording little or no effort (3.7.B.6a)
- Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
- Nearside Headlamp aim too low (1.8)
- Centre Seat belt anchorage prescribed area is excessively corroded (5.2.6)
- Offside Front Braking system leaking (3.6.A.1)
- Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
- Nearside rear brake binding (3.7.B.1)


Advisory:
- Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)
- Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
- Nearside Rear Shock absorber has a light misting of oil (2.7.3)
- Exhaust has part of the system slightly deteriorated (7.1.1a)
- Front Sub-frame corroded but not seriously weakened (2.4.G.1)
- Front coil spring corroded (2.4.C.1b)
- Rear coil spring corroded (2.4.C.1b)


User Entered:
- front cross member and o.s rear wheel arch corroded not support panel
- indicator tell tale visual not working
- n.s front bulkhead corroded not area
- generall underbody ben reundersilled

There were 9 defects noted.

Fail:
- Braking system leaking (3.6.A.1)
- Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)


User Entered:
- slight movemont both front wheel bearings
- both front brake disks ridged
- both front tyres down to 1.6mm
- fuel lines correded
- engine oil leaks
- exhaust rusted
- petrol cap seal perished